Scaffolding

The above photo is our logo on alibaba. It is two main products of all our products.

Frame scaffolding:

components of assembling

1.wooden planks-clean site and lay the wooden planks at the ground in horizontal position.

2.jack base-it is a base seat for adjusting and fixing the required scaffolding length above the wooden planks.

3.Main frame-insert the main frame into jack base section in per pendicular position.

4.cross brace-for fixing the main frame in each span of scafolding.

5.joint pin-insert into the top of main frame for joining the required dimension.

6.horizontal frame or catwalk(steel scaffolding plank)-it is a lateral pipe for frmaes used for fixing the main frame to complete the first floor scaffolding.(it can be erected with about 2 to 4 spans in each high rising floor alternately)

7.Wall tie(keeper joint)-use wall tie to prevent the frames from swaying down due to strong wind and unstable ground. Fasten the ties to walls every 4 span horizontally and every 4 frame , vertically.

Note: Fix the open-end frames firmly at their conners using joint after assembled.

shoring prop:

surface: HDG. DIP PAINTED, EG, POWDER COATED, ETC.

MATERIAL: STEEL Q235

PACKAGE: PALLET